Desiccant Dryers

Desiccant Dryers

If the water vapor and the water vapor in compressed air is cooled down in the pipe, serious problems will be caused. Our adsorption air dryer uses desiccant to bring the dew point of the water vapor down to -40℃ or below. Our adsorption air dryer also applies heatless regeneration. The desiccant in the vessel can be regenerated at lower pressure, with regeneration air consumption smaller than 15%.

The temperature of inlet compressed air is typically 40℃. The working pressure is ordinarily 7 bar with a maximum of 10 bar. The pressure of inlet air ranges from 0.6 to 1.0 Mpa, while the pressure loss of our dryer is less than 0.02 Mpa.

Our adsorption air dryer is coded in two parts. For example, DH-55 indicates that the model is an adsorption air dryer by the capital DH. While 55 indicates the flow capacity is 5.5 cubic meter per minute.

Technical Specifications of the Adsorption Air Dryer
Model Capacity Inlet/Outlet Dimension L×W×H ( mm) Net Weight (KG)
(M3/min)
DH-12 1.2 G1 780×500×1600 110
DH-26 2.6 G1 960×500×1880 150
DH-36 3.6 G1 960×500×2080 160
DH-55 5.5 G1 1/2 1000×500×1920 220
DH-69 6.9 G1 1/2 1070×500×1860 350
DH-85 8.5 G 2 1230×600×1820 430
DH-110 11 G 2 1230×600×2040 460
DH-135 13.5 G 2 1230×600×2240 520
DH-170 17 DN 65 1600×600×2400 720
DH-220 22 DN 65 1700×700×2250 890
DH-270 27 DN 80 1700×700×2550 950
DH-320 32 DN 80 1900×750×2640 1320
DH-450 45 DN 100 2100×900×2660 1550
DH-550 55 DN 100 2200×950×2710 1880
DH-650 65 DN 100 2300×1000×2810 2250
DH-850 85 DN 125 2500×1100×2910 2810
DH-1100 110 DN 150 3000×1600×3225 4150
DH-1400 140 DN 150 3000×1700×3225 4980

As a China-based desiccant dryer manufacturer and supplier, SUCCESS ENGINE also provides compressed air receiver, refrigerated dryers, belt drive rotary screw compressors 4-250kW (5-335HP), and rotary screw compressor parts, among others.

Related Names
Inline Compressed Air Dryer | Heatless Regenerative Dryer | Desiccant Dehumidifier

Related products
Inquiry Form
Other products